TMS Metalizing Systems, Ltd. - Go to Home Page

ARC140/S250-CL Arc Spray System (No longer available. See: Arcspray145/S245-CL)

Metallisation Logo

The Metallisation ARC140/S250-CL twin wire arc spray system with a 5m pull only setup is ideally suited to small engineering job shops where a combination of manual or tool post mounted spraying is performed. Alternatively, the S250 energiser, setup with a push/pull drive system and 5m, 10m or 20m supplies is ideally suited to small anti-corrosion applications where higher material throughput is not necessary (spraying small brackets for example).

The new ARC140/S250-CL is a unique blend of ability and innovation. This utilizes the ARC140 pistol and drive system plus the sealed, switched voltage S250 Energiser and added Closed Loop current control. This enables the operator to set the spray current independent of wire type before starting the job, enabling easier setup and protection of the system from over-current.

The control function is now controlled by a simple PLC which ensures improved reliability as less component parts are required. It also makes fault finding simple using a standard multimeter with the I/O for the PLC. The S250CL features sealed electronics for excellent reliability in the harshest of spray environments.

The design also allows for multiple customer-specific packaging options for the wire drive and dispense. In one option, for example, the unit is neatly mounted on the energiser, leaving it free to swivel and follow the operator when spraying. Other options include floor or trolley mounting of the wire drive unit. There is no motor in the pistol. Instead, the Arc140/S250-CL uses the Metallisation patented ‘Synchrodrive’ system, where a single, sealed motor and flexible drive arrangement, powers a reliable, positive drive push/pull up to a length of 20m. This results in a long reach and lightweight flexibility of the pistol and supplies – and more comfortable and productive working conditions for the operator.

ARC140/S250-CL Arcspray


  • New S250-CL sealed energiser = reliability
  • Closed-loop current = simplicity / reliability
  • Uses wires from 1.6mm to 2.5mm
  • Air cooled cables = lightweight
  • Excellent pistol manoeuvrability
  • 5,10 and 20m supplies packages
  • Anti-corrosion and engineering coatings
  • Easy to maintain = lower downtime
  • 5m pull option available for small workshops
  • MIG, coil and drum dispense
  • Soft start for smooth start ups = reliability
  • PTFE lined conduits = reliable long wire feed


  • Reclaiming parts
  • Engineering bond coats
  • Bearing and seal surfaces
  • Small anti-corrosion
  • Vessels and enclosures
  • Fences/ gates
  • Anti-spark coating
TMS Metalizing Systems is "The Right Choice"TM  in Thermal Spray Equipment!